- Brand: Heatshield Products
- Product Code: 800112
Our HP Felt Mat is the perfect high temperature insulation solution for heating issues caused by a diesel particulate trap retro fit, general exhaust heat, genset, turbo wrap, or any repower restoration. The special materials used in this fabric make it amazingly efficient at displacing thermal energy, even in a 1/8 inch thickness. The black side of this felt may be used directly on the exhaust system for direct insulation. The versatility of this product also allows it to be used as a heat shield thermal barrier by lining the engine compartment or under side of vehicle and facing the aluminum side towards the exhaust system to stop the radiant heat. When used as a heat shield barrier, attach mechanically with rivets or screws, large washers are also recommended. Designed to take temperatures of 1800 degrees F.
Features:
- Reflective radiant continuous temperature 1100 degrees F aluminum side
- Continuous direct contact temperature, 1800 degrees F, HP Felt side
- Heat shield mat is 1/4 Inch thick
- May be used as direct insulation on exhaust system, felt side contacting heat source
- Or face foil side towards heat source to act as a radiant heat shield barrier
- Size: 0.250 Inch Thick x 53 Inch x 60 Inch
- Operational Temperature: 1800 Degrees F
- Peak Temperature (30 seconds or less): 2200 Degrees F
- Color: Silver/Black
- Material: Proprietary Data
- Made in the USA
- Sold As Each
Installation Tips:
- Locking Ties and Product can be used as a radiant heat barrier or placed directly on heat source
Warnings:
- Always wear safety glasses
- Dust mask, gloves and long sleeves are recommended when handling this product
- Caution this material is electrically conductive
- Be sure to insulate any terminals that might come in contact with this product